Time Lapse - Resin 3D Print - Hex3D - Luke & Yoda - Elegoo Saturn - ResinLapse

24 Просмотры

Спасибо! Поделитесь с друзьями!

Вам не понравилось видео. Спасибо за то что поделились своим мнением!

Издатель Aug 3, 2022

This is a time lapse video I took with my Nikon Z5 camera using the very handy ResinLapse cable which has a UV light sensor which is placed in the printer and plugs into your Canon or Nikon camera and takes a picture every time the UV light turns on to cure a layer of the model, resulting in a very smooth time-lapse.
Available for purchase here: https://resinlapse.bigcartel.com/
(I'm not affiliated with them, I just find the product very useful)

This model is from the Patreon of Hex3D and is a beautifully detailed model.
https://www.patreon.com/Geoffro

The resin I used is Siraya Tech Easy Plant-Based 3D Printer Resin
https://amzn.to/3bpU5D3
(The above link is an Amazon Affiliate link and purchases made through it will generate a small amount of commission for me. Thanks!)
It is inexpensive, easy to use, and ideal for beginners. It's also low odor and quick curing as you can see from my settings below.

The settings I used in ChiTuBox for this print on my Elegoo Saturn printer are:
Layer Height: 0.05 mm
Bottom Layer Count: 6
Exposure Time: 2.2 seconds
Bottom Exposure Time: 23 seconds
Transition Layer Count: 10
Rest Time After Retract: 0.5 seconds
Bottom Lift Distance: 6 mm
Lifting Distance: 6 mm
Bottom Retract Distance: 6 mm
Retract Distance: 6 mm
Bottom Lift Speed: 40 mm/min
Lifting Speed: 60 mm/min
Bottom Retract Speed: 130 mm/min
Retract Speed: 160 mm/min
Ambient Room Temperature: 75° F

Under the Advanced Tab:
Anti-aliasing: On
Grey Level: 3
Image Blur: Off

Total print time: 10 hours 46 minutes

The music is by Joyless2
https://youtu.be/UeJp6lbN5nk

Please subscribe to this channel if you enjoy my content and stay tuned for more time-lapse videos and more of my ongoing video series on properly supporting models in ChiTuBox.

Thank you for watching!