Foldable Caterham S7 Print on CR10 3D printer

34 Просмотры
Издатель
I designed this in 1:38. This time I printed 1:32 scale. Print 126% bigger than I designed.
https://fab365.net/items/227

While designing many folding cars, I thought a lot about what would express the new structure as the next step. Then I came up with the idea of implementing a steering system. And I came to the idea of making this steering system easier to see. I thought of an F-1 racing car that was suitable for this, but it was too difficult.
So, choosing a simpler design, I found the Caterham Super 7.
And after trying in various ways, I realized a steering system that does not require assembly!!!

https://fab365.net/items/227

Another challenge is designing the parts to be separated and printed according to the color. Even if there are still few printers capable of multi-color printing, setting is difficult. That's why I designed it so that you can enjoy the result of combining various colors with a printer that prints in one color.

The folding sequence is a bit complicated. Please be sure to refer to the video~
1. Insert the rear wheel into the body.
2. Fit all tires.
3. Connect the tie rod to the opposite wheel.
4. Connect the front body as if wrapping it from the top to the bottom of the steering system. And press it up and down to connect it tightly.
5. Glue the rear wheel cover to the rear body. And connect this rear body to the back of the main frame.
6. Fit the front wheel cover to the hole in the steering system. This front wheel cover serves to securely fix the tie rod.
7. Insert the rest of the parts (head lamp, steering wheel, windshield, muffler, soft top, etc.) to complete.

Size, when all parts are fitted X 68mm, Y 133mm, Z 46mm
Категория
3D Принтеры
Комментариев нет.